CINCINNATI-MILACRON "MONOSET" TOOL & CUTTER GRINDER  MODEL MT,  SERIES "MONOSET"  EQUIPPED WITH:  1/4 HP MOTORIZED WORKHEAD, BIJUR LUBRICATION SYSTEM  LARGE COMPLIMENT OF TOOLING INCLUDING  COLLETS, CHUCK, WHEEL MOUNTS, ETC.  CATALOGUE SPECIFICATIONS:  COLLET WORK DIAMETER, MINIMUM                                 .125"  COLLET WORK DIAMETER, MAXIMUM                                1.25"  SWING OVER MAIN SLIDE, MAXIMUM                                  12"  WORK LENGTH CAPACITY:     BETWEEN SPINDLE & TAILSTOCK CENTER                         6"  WORKHEAD, MAIN SLIDE TRAVEL                                      5.75"  WORKHEAD, OFFSET SLIDE TRAVEL, TOTAL                    5.25"  WORKHEAD ANGULAR ADJUSTMENTS:  HORIZONTAL PLANE, TURNTABLE                                235-DEGREES  VERTICAL PLANE, ABOVE CENTER                               40-DEGREES  VERTICAL PLANE, BELOW CENTER                                40-DEGREES  WHEELHEAD, LONGITUDINAL SLIDE TRAVEL                        6"  WHEELHEAD, CROSS SLIDE TRAVEL                                   . 7.50"  WHEELHEAD, VERTICAL SLIDE TRAVEL, TOTAL                  9.50"  WHEELHEAD VERTICAL TRAVEL ABOVE CENTER.             4.25"  WHEELHEAD VERTICAL TRAVEL BELOW CENTER.             4.50"  GRINDING WHEEL DIAMETER, MAXIMUM                             4"  (3) WHEELHEAD, SPINDLE SPEEDS, RANGE        4000 TO 8000 RPM  WORKHEAD, SPINDLE SPEED                                         436 RPM  WORKHEAD MOTOR, HORSEPOWER                                1/4 HP  WHEELHEAD MOTOR, HORSEPOWER                              1/2 HP  FLOOR SPACE REQUIRED, W X D                                   25" X 26"  WEIGHT, APPROXIMATELY                                             1525 LBS. TERMS AND CONDITIONS: SPECIFICATIONS AND EQUIPMENT SUBJECT TO VERIFICATION WITH CORPORATE APPROVAL FULL PAYMENT DUE PRIOR TO MACHINE PREPARATION FOR SHIPMENT SUBJECT TO AVAILABILITY